I thought that this tool merited its own post

This tool is one of the best values out there.  It isn't one that you will use every day, but when you need it, you really need it.  For $9 you can buy a couple.  This tool is great on its own, but when you make tips for it, it really starts to shine.  That ratcheting action isn't smooth or strong, but it is one really important thing - tiny.

Low profile head fits even tight corners


I ground down an adapter to make a skinny narrow 1/4" ratchet


No comparison with the standard Craftsman ratcheting hex driver


It is little.  I brazed a piece of coat hanger onto this tip so that it couldn't slip through the driver




Craftsman  5 pc. Reversible Offset Ratchet Screwdriver Set

  Item#  00941469000 | Model#  41469


Posted by

2 comments:

  1. AnonymousDecember 22, 2015 at 11:14 AM

    I'm 17 yrs old and im curious about this career. Can someone tell me more about this? Is this a good career as in salary and job options?
    material handling equipment

    ReplyDelete
  2. Ben JohnsonSeptember 9, 2017 at 5:17 PM

    I have looked at various tools to get into limited access screws or nuts/bolts. https://www.walmart.com/ip/Bostitch-BTMT72275-32-Piece-Bit-Wrench-Set/25440938?wmlspartner=wlpa&selectedSellerId=0&adid=22222222227019227742&wl0=&wl1=g&wl2=c&wl3=40873163432&wl4=aud-310687321802:pla-78766137152&wl5=9018570&wl6=&wl7=&wl8=&wl9=pla&wl10=8175035&wl11=online&wl12=25440938&wl13=&veh=sem

    That is one of the better tools I have found. It has a fine tooth ratchet and it has a spring for bit retention. The spring allows you to grind normal bits to various lengths for different locations and still have them retained.

    ReplyDelete

Subscribe to: Post Comments (Atom)